NEC专业投影机镜头

NEC激光液晶投影长短焦镜头

NEC激光投影机投影镜头
投射比:0.5:1 0.56:1 0.6:1  0.7:1 0.8:1 0.77-1.42:1 1.1-1.9:1 2.7-4.7:1 4.7-8.0:1
支持NEC投影型号:NP-PA703UL+ NP-PA803X+ NP-PA803U+ NP-PA703X+ NP-PA653W+ NP-PA753W+ NP-PA9-4UL-B+ NP-PA1004UL-B+ NP-PA1004UL-W+ NP-PA804UL-W+
描述
支持NEC投影型号:NP-PA703UL+ NP-PA803X+ NP-PA803U+ NP-PA703X+ NP-PA653W+ NP-PA753W+ NP-PA9-4UL-B+ NP-PA1004UL-B+ NP-PA1004UL-W+ NP-PA804UL-W+
 


 

投影方式 带微镜列阵0.76英寸LCD(显示高宽比16:10)
分辨率*1 1920 × 1200 像素 (WUXGA)
镜头 可选电动变焦和聚焦(NP40ZL、NP41ZL、NP43ZL)
镜头移动 电动镜头位移
光源 激光二极管
光源寿命(节能模式/标准模式) 20000小时
光亮度*2*3 7000 流明
对比度*3(全白: 全黑) 2500000:1
影像尺寸 (投射距离) 50–500 英寸
输入 1 个 RGB/组合(D-Sub 15 针),
2个支持 HDCP 的 A 型 HDMI( 19P, HDMI® 连接器),
1 个支持 HDCP 的 DisplayPort( 20针连接器),
1 个HDBaseT,1个立体声微型音频
输出 1 个HDBaseT,1个立体声微型音频
3D端口 1 个 3D SYNC(DIN 3 针)
控制端口 1个控制串口端口槽(D-Sub 9 针)
有线局域网端口槽 1 个 RJ-45 端口槽(10BASE-T/100BASE-TX)
USB端口槽 1个A型USB
有线遥控端口 1个立体声微型插孔
色彩还原 10 位信号处理 (10.7 亿色)
兼容的信号*4

模拟:VGA/SVGA/XGA/XGA+/WXGA/WXGA+/SXGA/SXGA+/UXGA/
Full HD/WUXGA/2K 480i/480p/576i/576p/720p/1080i/1080p
数字:VGA/SVGA/XGA/WXGA/SXGA/WUXGA/2K/WQXGA/4K/480p/720p/1080i/1080p
数字 3D:帧封装格式、上下格式或并排格式的720P/1080P,并排格式的1080i

水平分辨率 540 电视线:NTSC/PAL/PAL60
300 电视线:SECAM
扫描率 水平:15 千赫兹至 100 千赫兹(RGB:24 千赫兹或以上)
垂直:50 赫兹至 120 赫兹(HDMI:24 赫兹至 120 赫兹)
同步兼容 分离同步
电源要求 200—240伏特,50/60赫兹交流电
输入电流 4.5安培
功率 标准模式 613瓦
待机(省电) ≤0.5 瓦
安装方位 桌面/正投,桌面/背投,吊顶/正投,吊顶/背投
尺寸 580毫米 (宽) ×205毫米 (高) × 490毫米 (深)(不包括突出部分)
重量 18.2千克
环境设计 操作环境 操作温度:5°C 至 40°C,20% 至 80% 湿度 (无结露)
保存环境 保存温度:-10°C 至 50°C,20% 至 80% 湿度 (无结露)
符合规则 CCC认证,符合 GB4943;GB9254;GB17625.1
*1 有效像素超过 99.99%。
*2 这是 [预置] 模式设置为 [标准] 时的光亮度值 (流明)。若选择任何别的模式作为 [预置] 模式,光亮度值会稍微下降。
*3 依照 ISO21118 标准:该标称值代表量产时产品的平均值,而产品的出厂最低值为标称值的 80%。
*4 分辨率高于或低于投影机原始分辨率(PA703UL+: 1920 × 1200)的影像将使用 Advanced AccuBlend(智能压缩)技术来显示。
*5 PA703UL+与NP-PA703UL+为同一型号。
- 这些规格和产品设计如有变更,恕不另行通知。

NEC激光液晶投影机0.8镜头测试替代NP11FL短焦镜头
 
NEC激光液晶投影机0.6:1镜头评测替代NP44ML

NEC激光液晶投影机投射比1.1-1.9:1镜头评测替代NP12ZL短焦镜头

NEC激光液晶投影机投射比0.54:1短焦镜头替代NP44ML


NEC激光液晶投影机加0.7:1镜头评测替代NP40ZL短焦镜头



NEC液晶激光投影仪长焦镜头投射比2.9-4.7:1评测 替代NP43ZL



1.投射比:镜头到画面距离除以画面宽度

   Projection ratio: distance from lens to picture divided by picture width

2.9点亮度均匀度:9点平均亮度除以其中的最高亮度

   9 brightness uniformity: 9 points average brightness divided by the highest brightness

3.与标镜9点均匀亮度光衰比例:镜头9点平均亮度除以标镜9点平均亮度

   Light attenuation ratio of uniform brightness at 9 points of the standard mirror: average brightness at 9 points of the lens divided by average brightness at 9 points of the standard mirro
 



CAUTION(注意)
LE DU Lens Unit User’s Manual
(镜头部件 用户手册)
Do not give a shock or excessive load to the projector or the lens components as the projector and lens components contain precision parts.
(因为投影机和镜头部件包含精密零件,所以不要对投影机或镜头部件进行剧烈震动或超负载)
When shipping the projector with the lens,remove the lens before shipping the projector. The lens and the lens shift mechanism may encounter damage caused byimproper handling during transportation.
(运输带有镜头的投影机时,运输之前需移除镜头。搬运期间处理不当可能会损坏镜头和镜头位移机制。)
Before removing or installing the lens, be sure to turn off the projecttor, wait until the cooling fans stop, andunplug the power cord.
(移除或安装镜头之前,务必关闭投影机,等待直到冷却风扇停止运转,并拔出电源线。)
Do not touch the lens surface when removing or installing the lens.
(请不要在移除或安装镜头时触及镜头表面。)
Keep fingerpeints, dust or oil off the lens surface. Do not scratching.
(防止指纹、灰尘或油附着到镜头表面。请不要刮伤镜头表面)
Work on a level surface with a soft cloth under it toavoid scratching.
(请在水平面上作业,并在镜头底下铺一块软布以免刮伤。)
When using the lens unit, set the lens shift adjustment to the center of the screen.
(当使用镜头部件时,将镜头位移设定至屏幕中央。)
Adjustment to the lens shift adjustment to the position other than the above can cause the edges of the image to become dark or can cause some shadows.
(将镜头位移调节到上述位置以外的其它位置,可能会使影像边缘变得暗淡或者造成黑影。)
 



 

 
 
 



 

评论

1/3
X
Welcome to LEDU lens
Welcome to the world's largest alternative lens provider. We can provide projection lenses with a projection ratio of 0.3-9:1. Welcome to leave your communication method and we will have someone to serve you.