奥图码投影镜头

奥图码家用4K激光投影UHZ880+镜头更换

奥图码UHZ880+镜头更换
投射比:0.82:1
只有一款镜头需要拆机更换,我们可以提供北京上海广州深圳长沙拆机服务。
描述
奥图码投影型号:UHZ880+
 
显示技术

"TI” DMD 0.66” TRP S610 4K UHD

分辨率

UHD with XPR

输出亮度(高亮模式)/对比度

3000 ANSI 流明 / 2,000,000:1

投影镜头

F2.5-3.26 f20.91-32.62 1.6X缩放及对焦镜头

投影距离

1.3m~9.3m (Focus range, optimized @ wide 1.846m)

投影尺寸(对角线)

2160p: 26” to 300” (Focus range, optimized @ wide 60" image size)

投射比/Offset

1.39~2.22 / 100%±15% (tolerance: ±5%)

镜头位移

Vertical: 100%+15% offset (with tolerance +/- 5%)

影像格式

16:9 Native, 4:3 Compatible

扫描频率

31.000~135.000KHz, 24Hz to 120Hz

计算机兼容格式

VGA, SVGA XGA, HDTV(720P), WXGA, WXGA+, SXGA, UXGA, HDTV(1080p),WUXGA,UHD

视频兼容格式

SDTV 480i/p, 576i/p,HDTV 720p(50/60Hz), 1080i(50/60Hz), 1080p(24/50/60Hz) UHD 2160p(24/50/60Hz)

信号输出入接口

HDMI 2.0 HDCP2.2(MHL2.1) x1, HDMI 1.4a x1, VGA In x1, Audio In x1, Audio Out x1, SPDIF out x1, RS232C x1, RJ-45 x1,12V Trigger x1, USB Type Ax1(5V/1.5A), USB Ax1(Service)

扬声器

4W x2

工作噪音

29dB

光源规格

Laser

整机功耗

380 W Max. 435 W @ 220VAC

固件版本

DDP:C08
MCU:C04
9U13:C17
7410:C06

体积 (宽 x 深 x 高) / 重量

498 x 331 x 141mm(w/o feet)<10 Kg

吊装螺丝

M6 x10mm x4颗


奥图码UHZ880镜头更换完毕后效果,投射比0.82:1




1.投射比:镜头到画面距离除以画面宽度

   Projection ratio: distance from lens to picture divided by picture width

2.9点亮度均匀度:9点平均亮度除以其中的最高亮度

   9 brightness uniformity: 9 points average brightness divided by the highest brightness

3.与标镜9点均匀亮度光衰比例:镜头9点平均亮度除以标镜9点平均亮度

   Light attenuation ratio of uniform brightness at 9 points of the standard mirror: average brightness at 9 points of the lens divided by average brightness at 9 points of the standard mirro


CAUTION(注意)
LE DU Lens Unit User’s Manual
(镜头部件 用户手册)
Do not give a shock or excessive load to the projector or the lens components as the projector and lens components contain precision parts.
(因为投影机和镜头部件包含精密零件,所以不要对投影机或镜头部件进行剧烈震动或超负载)
When shipping the projector with the lens,remove the lens before shipping the projector. The lens and the lens shift mechanism may encounter damage caused byimproper handling during transportation.
(运输带有镜头的投影机时,运输之前需移除镜头。搬运期间处理不当可能会损坏镜头和镜头位移机制。)
Before removing or installing the lens, be sure to turn off the projecttor, wait until the cooling fans stop, andunplug the power cord.
(移除或安装镜头之前,务必关闭投影机,等待直到冷却风扇停止运转,并拔出电源线。)
Do not touch the lens surface when removing or installing the lens.
(请不要在移除或安装镜头时触及镜头表面。)
Keep fingerpeints, dust or oil off the lens surface. Do not scratching.
(防止指纹、灰尘或油附着到镜头表面。请不要刮伤镜头表面)
Work on a level surface with a soft cloth under it toavoid scratching.
(请在水平面上作业,并在镜头底下铺一块软布以免刮伤。)
When using the lens unit, set the lens shift adjustment to the center of the screen.
(当使用镜头部件时,将镜头位移设定至屏幕中央。)
Adjustment to the lens shift adjustment to the position other than the above can cause the edges of the image to become dark or can cause some shadows.
(将镜头位移调节到上述位置以外的其它位置,可能会使影像边缘变得暗淡或者造成黑影。)

 

评论

1/3
X
Welcome to LEDU lens
Welcome to the world's largest alternative lens provider. We can provide projection lenses with a projection ratio of 0.3-9:1. Welcome to leave your communication method and we will have someone to serve you.